lab furniture

lab furniture 1.size:1700/1200W*600D*800H 2.material:steel 3.fire/acid/alkali/water proof 4.many colors

lab furniture

1,Work top:

Made of (13 mm to 19mm) thick trespa top with bull nose/chamfer moulding at the front & groove at the bottom to avoid chemical spillage.

2,Material of construction:

Completely made of 1mm GI sheets.

3,Module:

Completely made of 1mm GI sheets as per IS 277 standard.CRCA corrodes and hence not acceptable.The shutter&drawer front should be of sandwich construction.Foam sheet filled in shutter gaps is not allowed.The sound deadning plastic bumpers to be used to minimize banging noise while closing the shutter.Ther entire module is made up of GI panels and are bolted for high corrossion resistance.Welding of modules is not accetable.The shutters are mounted to the modules by hinges which are openable to 95 degree&self closing on return.Lockable roller bearing must used so that the drawer will not fall.The telescopic drawer slides which should be very sturdy &able to take load upto 30kg.

 Length:450mm/600mm/750mm/900mm L

Depth:570mmD

Height:675mmH –for Standing height

Height:525mmH-for Sitting Height

4,Module Bottom Frame:

Pedestal type .square tubes 40mm*60mm thick&angles 30mm*30mm thick welded&finished with epoxy power coating

5,Knee Space area:

Foot rest with openable back cover panel.It must be adjustable

Instrumentation and Sitting area knee space need to be 600 or 750mm

6,Reagent Rack:

Island Table:Reagent Rack will be of 300mmD*600mmH

Side Table:Reagent Rack will be of 150mmD*600mmH

7,Electrical Trunking:

Island Table: Triangular Electrical Trunking of 200mmD*120mmH

Wall Table :Triangular Electrical Trunking of 120mmD*120mmH

8,Cabling:

Complete electrical cabling with FRLS 1.5&2.5sq mm wires with end connector for termination at one end of the trunking.

9,Powder Coating:

Complete module&Padestals are processed with 8tank pre-treatment and finished with highly corrossion resistant Polycoat epoxy powder coating with 70-80 microns thickness and 750 hours salt spray test capability.

10,Hardware fittings:

Hinges:concealed slip-on full overlay type

Handle:SS 304 matt finish

Screw:All S.S. 304 Visible Screws.

Utility taps:epoxy powder coated brass taps

Sink: PP sink black P.P. anti-siphon bottle trap.

Eye Wash: Portable Eye Wash with Dual eye wash option.

Peg Board:Acrylic support Peg Board with 16/30 pegs.

  

lab furniture